Nuki

Here you can connect and manage Nuki smart locks or other Nuki devices with the nomos system Controller.

Steps to Set Up:

1. Adding Devices:

   • If no Nuki device is connected yet, the page will show the message "No device found".
   • To add a device, you need to first set up the Nuki device using the official Nuki app.
   • After that, you can integrate the device into the nomos system Controller by clicking the "Add Device" button.

2. Integrating with nomos:

   • After clicking "Add Device", the nomos system Controller will look for available Nuki devices.
   • If a Nuki Bridge has not been authorized yet, click Authorize next to the bridge in the list. Please press the button on your Nuki Bridge. appears; then press the button on the bridge.
   • Select the device and click Next.
   • Newer Nuki devices operated without a Nuki Bridge can also be set up via MQTT, with the nomos system Controller as MQTT broker.
   • Once the device is found and added, it will be displayed on this page and can be used for automations, scenes, and smart home controls.

INFO

Notes:

• Important Step: Before you can integrate Nuki devices into nomos, they must be set up and connected to your network using the Nuki app.
• The Nuki integration allows you to control your door locks and other compatible devices directly through nomos and include them in your smart home workflows.

INFO

Important:

Make sure all Nuki devices are properly set up and connected in the Nuki app before adding them to the nomos app.

Ensure that the necessary remote settings are activated in the Nuki app to allow access from other devices (e.g., nomos system Controller).