Matter

Integration with Matter

The Matter integration allows you to connect the nomos system Controller with an ecosystem of your choice, such as Amazon Alexa, Apple, Google Home, Samsung SmartThings, LG ThinQ, Home Assistant, and more. This is easily done by scanning a QR code with a compatible device.

Setup Steps:

1. Enable Matter:
   • Ensure the switch is turned ON to activate the Matter function.
2. Start Pairing:
   • Open the desired manufacturer app.
   • Scan the displayed QR Code on the screen to pair the nomos system Controller.
3. Alternative: Use Pin-Code:
   • If the QR code cannot be scanned, enter the displayed Pin-Code in your app to manually establish the connection.
   • Some apps also ask for the Discriminator and Passcode when pairing manually. You find both under Details right below the Pin-Code.
4. Additional Pairing:
   • To connect the nomos system Controller with an additional ecosystem, use the "Turn On Pairing Mode" button and repeat step 2 or 3.
   • Pairing mode stays open for 15 minutes and then closes by itself. Turn Off Pairing Mode closes it earlier.
   • The Controller can be paired with up to nine ecosystems at the same time. If nine are already paired, Maximum number reached appears. In that case, first remove a connection in the respective ecosystem.
5. Reset Pairing:
   • To completely reset the Matter configuration, click the red Reset button if you want to reconfigure the connections.

Devices

It is also possible to pair Matter-compatible devices with the nomos system Controller.

Setup Steps:

1. Launch App:
   • Open the manufacturer app or an app from your preferred ecosystem, such as the Apple Home app.
2. Start Pairing:
   • Select the desired Matter device.
   • Open the settings and start the Pairing Mode, and note the Code.
3. Manage Devices:
   • Choose "Manage Devices" on the nomos system Controller.
4. Add Device:
   • The device in pairing mode should appear in the list.
   • Click Add next to it, enter the previously noted Code in the Setup code field and confirm with Add.
   • If the device does not appear in the list, enter the code directly in the Setup code field below the list and click + Add next to it. Reload refreshes the list.
   • Pairing may take some time. Once completed, the device can be renamed and assigned to a room.
   • Repeat steps 2-4 for each additional Matter device you wish to add.

Reset:

• To completely reset the Matter device configuration, click the red Reset button. Warning: You will then need to re-pair all devices!