# 6. Network Settings

In the next step, you need to set up the network settings.

* **Screen Display:**
  * Activate or deactivate the DHCP option. By default, DHCP is enabled, which means the IP address is assigned automatically.
  * IP Adress: 192.168.55.120 (if DHCP is enabled, the IP will be assigned automatically)
  * Subnet Mask: 255.255.255.0
  * Router: 192.168.55.1

Note: It is recommended to configure a static IP address for a more stable network connection.

* **Step:** If you are using DHCP, make sure the boxes are filled out correctly. If configuring a static IP address, manually enter the required information.
* **Next Step:** Click on “Next” to continue with the setup.

<figure><img src="/files/q3aNnQgwJxAQCJvNLTF8" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://documentation.nomos-system.com/nomos-system/integrator-en/first-steps/6.-network-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.